Panasonic PT-DW7000U, PT-D7700U manual Adjusting the input resolution

Adjusting the input resolution

Input resolution adjustment achieves the best image when the screen flickers or halo is observed around the contour.

Procedure of adjustment

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

SECURITY

:MENU SELECT

ENTER:SUB MENU

ADVANCED MENU

DIGITAL CINEMA REALITY AUTO

FORMATSMPTE

BLANKING

INPUT RESOLUTION

CLAMP POSITION

EDGE BLENDING OFF

SYNC.TERM75

RASTER POSITION

:MENU SELECT

ENTER:SUB MENU

INPUT RESOLUTION

TOTAL DOTS	1056
DISPLAY DOTS	832
TOTAL LINES	666
DISPLAY LINES	624

:MENU SELECT :ADJUST

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select the “ADVANCED MENU” with

the buttons.

Press the “ENTER” button.

The ADVANCED MENU screen will be displayed.

Select “INPUT RESOLUTION” with the buttons.

Press the “ENTER” button.

The INPUT RESOLUTION screen will be displayed.

Select one of the following items with

the buttons and adjust it with the buttons.

“TOTAL DOTS”, “DISPLAY DOTS”, “TOTAL LINES” and “DISPLAY LINES”

Each item automatically displays a value in response to the type of the input signal. If vertical stripes appear on the screen or the image is partly missing, increase or decrease the displayed value while observing the screen to achieve the optimal value.

Note • The abovementioned vertical stripes will not appear on the screen when all signals are input.

•The picture may be distorted during the adjusting operation, but this is not a fault.

•The input resolution can be adjusted only when RGB signal input is applied with RGB1, RGB2 IN, and the analog RGB input module (optional: ET-MD95RGB).

63