51
Cleaning the Air Filter

Air Filter

The air filter should be cleaned about every 100 hours. Also,
clean the air filter if the “A-0” is indicated in the STATUS CODE
display.
Replace the filter when it is clogged or dirty even after cleaning.

Cleaning procedure

Tools required: Vacuum Cleaner.
CAUTION: Operating LCD Projector with
torn or damaged Filter may
cause damage to LCD Projector.
MAIN POWER Switch
•Wait until the cooling fan stops and the STANDBY(R)
ON(G) indicator turns solid red.
1Set the MAIN POWER Switch to OFF and
unplug the power cord.
2Place the LCD Projector up on its side as
illustrated.
3Remove the Air Filter unit
Hold the indent on the Air Filter unit with your hands
and pull the Air Filter unit out of the LCD Projector.
4Clean the Filter.
Gently remove any accumulated dust from Air Filter unit
with your vacuum cleaner.
5Replace the Air Filter unit.
Slide the Air Filter unit into the LCD Projector until
hollows in the Air Filter unit are aligned with the
hollows in the Projector.
•The LCD Projector power cannot be turned on
unless the Air Filter unit is correctly installed.
•Using with the air filter sponge removed will result
in dirt and dust being drawn in and lead to
malfunction.
•When transporting the PT-L759XU/PT-L759VU, grasp
the carrying handle and place in a flat, stable place.
•If the dust cannot be removed by cleaning, it is time to replace the air filter. Consult a sales outlet.
Note
Note
Note
Air Filter unit
Crevice
Attachment
Indent