Panasonic PT-L759XU, PT-L759VU 1, 2, 3, 4

53

Lamp replacement procedure

Caution: Because of possibility of injury, strictly follow the replacement procedure below.

Order Lamp ET-LA059X.

1After the cooling fan has stopped, and

STANDBY(R) ON(G) indicator turns solid

red. Set the MAIN POWER Switch to OFF

and unplug the power cord.

Please wait more than one hour for lamp replacement.

[ If you need to replace the lamp more urgently ]

•The LCD Projector has a forced cooling feature. After

the POWER switch is turned OFF, and sometime during

about the 2 minutes of the normal cooling fan operation,

press and at same time. The cooling fan will change

to high speed for about 10 minutes. (The "C-d"

STATUS CODE will be displayed.)

WARNING: The lamp may be hot. Be careful when handling.

CAUTION: • High-pressure lamp may be explode if

improperly handled.

• Danger of injury due to lamp fragments.

2Grabbing the handle, place the LCD Projector

up on its side as illustrated.

3Remove the Lamp cover screws.

First read caution and warning labels.

Then, remove the Lamp cover screws (2) by

using screw driver, and take off the lamp cover.

4Remove the Lamp unit screws.

Remove the lamp unit screws (2), then grasp the

Lamp unit handle and carefully pull it from the

LCD Projector. Keep Lamp housing opening to

your right. Do not touch Lamp or point Lamp

opening at anyone.

Lamp unit

screw

Lamp Replacement

Lamp cover

screw

screw driver

screw driver

MAIN POWER Switch

•When transporting the PT-L759XU/PT-L759VU, grasp

the carrying handle and place in a flat, stable place.

Note

Note

Lamp unit handle

Contents

Main Things You Should Know Dear Panasonic Customer: Table of Contents Getting Started Basic Operation Useful Functions Other Information Page Important Safeguards LCD Projector Features Contents of LCD Projector Box 13 14 15 16 Product Information LCD Projector Product Information [ Side ] Remote Control Unit [ Front ] [ Back ] Using the Laser Pointer on the Remote Control Unit Before using the Remote Control Unit 3 Page Standard Setting-up Positions LCD Projector /Screen Relative Position Chart Screen Requirements Screen characteristics (reference) Turning the power on and off 2 1 2 1 3 (LCD Projector) or Adjusting the LCD Projector Projection Angle Adjusting the Lens Press the INPUT button Changing the input signal or Note Basic LCD Projector Operation 1 (The Main MENU screen will be displayed.) Function teseR P 1 (The Main MENU screen will be displayed.) 2 (The Second MENU screen will be displayed.) When DVI-D signal is being projected. [PT- L759XU only] Returning adjustment values to the factory default settings (standard values) All items displayed in the second menu return to the factory settings. Only items selected in the second menu return to the factory settings. Bar Scale display Setting-up Positions and Changing the Projection Mode (Up and Down displays in reverse) (Up and Down/Right and Left reverse display) Select 3 ......CEILING/REAR Select 4 ......CEILING/FRONT (Factory setting) 3 Setting the Screen Type (4:3) 16:9 (Wide) Function OFF 16:9 (Wide) Function ON 4:3 Type Screen 16:9 Type Screen (16:9) Digital Variable Compression Adjustment procedure teseR Press .......The image is enlarged. 3 Keystone correction function Keystone (top : wide) Keystone (under : wide) Keystone Image Corrected Image Press ... Top becomes narrow. RGB Signals that can be Input DVI-D Signals that can be Input English S-VIDEO/VIDEO Signal that can be Input - 27 Blue (Black) Screen with No Input Signal Component Signals (YPBPR) that can be Input S-VIDEO/VIDEO Signal Format Selection normal picture is obtained. 2 3 NTSC4.43, PAL, PAL-M, PAL-N or SECAM until a Selecting the Image Quality 3 to display the Image Quality individual adjustment screen. 4 Selection of quality of image cannot be performed at the time of DVI-D signal is Adjusting the Picture to the Desired Setting Adjustment item Button Adjustment Details Adjustment Range Remarks Color Tint Brightness Contrast Sharpness YPBPR, S-VIDEO/ VIDEO only NTSC/NTSC 4.43 (S-VIDEO/VIDEO) S-VIDEO/VIDEO Adjusting the White Balance Unless properly adjusted, none of the colors may display normally. Adjustment procedure Adjustment item Button Adjustment Details Adjustment Range Max. value + 30 Min. value - 30 Using the Auto Setup Feature Selecting procedure (for on-screen display operation) 1 from the connected device, and then project it. 2 3 Adjusting the Image Position, Dot Clock and Phase RGB,YPBPR only noitisoP H When adjusting the Horizontal Position (H Position) 2 2 3 You can select English, German, French, Spanish, Italian, and Japanese Turning off the input signal display 3 4 Auto Lamp Off tuA 3 the screen. 4 nim5ffOpmaLo The minutes remaining is displayed during the last 5 minutes before the power shuts off. 2 3 Procedure RemarksDescription No. of Dots H Frequency V Frequency Signal Lamp Runtime Digital Zoom Projecting the DTV Format Signal Setting of the RGB1/YPBPR Input Signal Selection 2 3 4 Changing the RGB2 IN/RGB1 OUT Terminal 2 a 3 If RGB1 OUT is set and RGB2 is selected when changing input, the screen goes to blue back. System Configuration Example Notes on system configuration Note VCR Example of connection to audio-visual equipment System Configuration Example Personal Computer Personal Computer System Configuration Example Connecting D-sub 15-BNC5 (female) Adaptor Cable DVD Player Audio system Page Video/Personal Computer Cables & Adaptors [ DVI-D connector ] [ VGA MAC Adaptor ] [ Setting the DIP Switches ] [ RGB connector ] Page Using the SERIAL connector (RS-232C) Example of connection Wireless mouse and keyboard Operation 1 Removing and Attaching the Carrying Handle When Attaching the Carrying Handle When Removing the Carrying Handle 1 2 Status Code Display Indications F-L F-0 A-n A-0 L-n P-2 P-3 P-4 L-1 L-0 C-d Cleaning the Air Filter Air Filter Cleaning procedure 1 unplug the power cord. Lamp replacement period Warning In case lamp use reaches 2 000 hours Lamp replacement procedure 1 2 3 4 Page Specifications Specifications and design are subject to change without notice. Specifications Specifications and design are subject to change without notice. Before Requesting Service Ce quil faut savoir Cher Client: Page Notes importantes concernant la scurit Utilisation de lindicateur laser sur la tlcommande Avertissement Remarque Avertissement Priode de remplacement de la lampe 1 2 7 3 4 Wissenswertes Lieber Panasonic-Kunde, Page Wichtige Sicherheitshinweise Lampenaustausch Benutzung des Laserzeigers der Fernbedienung Achtung Wenn man mit dem Laserstrahl auf die Leinwand zeigt, wird auf der Leinwand der Zeiger abgebildet. Lampenaustauschperiode Warnung 1 2 3 4 5