JVC KD-SX992R manual Other Main Functions, Setting the clock, Changing the general settings PSM

OTHER MAIN FUNCTIONS

Setting the clock	To check the current clock time while the unit
	is turned off, press DISP (display).

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

(See page 26.)

The power turns on, the clock time is shown for 5

seconds, then the power turns off.

Changing the general settings (PSM)

You can change the items listed on the next page

by using the PSM (Preferred Setting Mode) control.

ENGLISH

2 Set the hour.

1Select “CLOCK H (hour)” if not shown on the display.

2 Adjust the hour.

1 2

3 Set the minute.

1 Select “CLOCK M (minute).”

2 Adjust the minute.

1 2

4 Set the clock system.

1 Select “24H/12H.”

2 Select “24H” or “12H.”

1 2

5 Finish the setting.

Basic Procedure

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

(See page 26.)

2 Select the PSM item you want to adjust. (See page 26.)

3 Adjust the PSM item selected.

4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.

5 Finish the setting.

25