JVC KD-SX921R manual Storing your own sound adjustments, English, Press MODE, Adjust the level

ENGLISH

•When “CEQ LINK” is set to “LINK ON” The selected sound mode can be stored in memory for the current source.

Each time you change to the same source, the same sound mode is also recalled and shown on the display. The C-EQ indicator also flashes.

•When “CEQ LINK” is set to “LINK OFF”

The selected sound mode effect applies to any source.

Storing your own sound adjustments

You can adjust the sound modes to your preference and store your own adjustments in memory.

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press MODE.

“MODE” appears on the lower part of the display, and the number buttons work as different function buttons.

2 Press EQ (equalizer) while “MODE” still on the display.

The last selected sound mode is recalled and applied to the current source.

4 Select the item you want to adjust.

• See page 22 for details.

5 Adjust the level.

To increase the level.

To decrease the level.

Equalization pattern changes as you adjust the bass or treble.

Ex.: When you adjust “TRE”

6 Repeat steps 4 and 5 to adjust the other items.

7 Repeat the same procedure to store other sound modes.

To reset to the factory settings, repeat the

same procedure and reassign the preset values listed in the table on page 23.

Sound mode indicator flashes.

Ex.: If you have selected “ROCK” previously

3 Select the sound mode you want to adjust.

24