BASIC OPERATIONS

 

 

ENGLISH

1

3

2

Turning on the power

1 Turn on the power.

“HELLO” appears on the display.

Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.

2 Select the source.

To select the tuner, press FM AM

repeatedly.

FM1 FM2

AM FM3

To select CD, CD changer (or “LINE IN”*),

press CD CD-CH (AUX) repeatedly.

CD

CD-CH

(or LINE IN)*

*If “LINE IN” does not appear on the display (see page 28), set the “EXT IN” setting to “LINE IN.”

To select “AUX IN” (component connected to the AUX IN jack on the control panel),

press and hold CD CD-CH (AUX).

3 Adjust the volume.

To increase the volume.

To decrease the volume.

Volume or audio level indicator (see page 27)

Volume level appears

4 Adjust the sound as you want. (See pages 22 – 24.)

To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.

If you turn the control dial, you can also restore the sound.

To turn off the power

Press for more than one second. “SEE YOU” appears, then the unit turns off.

If you turn off the power while listening to a disc, CD play will start from where playback has been stopped previously next time you turn on the power.

Note:

When you use this unit for the first time, set the built-in

clock correctly, see page 25.

7

Page 7
Image 7
JVC KD-SX992R, KD-SX921R manual Turning on the power, To drop the volume in a moment, To turn off the power, Cd-Ch