JVC KD-SX921R manual To select the telephone muting – TEL, To select the external component to use

ENGLISH

To select the telephone muting – TEL

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from this unit.

When shipped from the factory, this mode is deactivated.

•MUTING 1: Select this if this setting can mute the sounds.

•MUTING 2: Select this if this setting can mute the sounds.

• OFF: Cancels the telephone muting.

To turn on/off the key-touch tone – BEEP

You can deactivate the key-touch tone if you do not want it to beep each time you press a button. When shipped from the factory, the key-touch tone is activated.

To select the external component to use

–EXT IN

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component – CD changer or external component

– to use.

When shipped from the factory, CD changer is selected as the external component.

• LINE IN: To use the external component other than CD changer.

• CHANGER: To use the CD changer.

Note:

For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/Connection

Manual (separate volume).

• ON:	Activates the key-touch tone.
• OFF:	Deactivates the key-touch tone.

To select the scroll mode – SCROLL

You can select the scroll mode for the disc information if it consists of more than 8 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE.”

• ONCE:		Scrolls only once.
•	AUTO:	Repeats the scroll
		(in 5-second intervals).
•	OFF:	Cancels Auto Scroll.

To adjust the auxiiliary input level

–AUX ADJ

Adjust the auxiliary input properly when an external component is connected to the AUX input jack. When shipped from the factory, the AUX input level is set at level “00.”

If the level of the connected component is not high enough, increase the input level properly. Without adjusting the line input level, you may be surprised at a loud sound when you change the source from an external component to another source.

28