JVC KD-SX992R Searching a station manually: Manual search, English, Select the band FM1 – 3, AM

Searching a station manually: Manual search

1 Select the band (FM1 – 3, AM).

FM1	FM2	FM3	AM
(F1)	(F2)	(F3)

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4 until “MANU” (manual) starts flashing on the display.

•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM – MW/LW) until you release the button.

When an FM stereo broadcast is hard to receive:

1 Press MODE to enter the functions mode while listening to an FM stereo broadcast.

“MODE” appears on the lower part of the display, and the number buttons work as different function buttons.

2 Press MO (monaural), while “MODE” is still on the display, so that the MO indicator lights up on the display.

Then, each time you press MO (monaural), the MO indicator lights up and goes off alternately.

ENGLISH

Selected band appears.

Lights up when receiving an FM broadcast in stereo.

3 Tune in to a station you want while “MANU” is flashing.

Press ¢ to tune in to stations of higher frequencies.

Press 4 to tune in to stations of lower frequencies.

When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).

9