JVC KD-SX921R manual External Component Operations, Playing an external component, Preparations

EXTERNAL COMPONENT OPERATIONS

ENGLISH

Portable MD player, etc.

AUX input

Playing an external component

You can connect two external components to this unit.

Connect one to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied), and the other to the AUX (auxiliary) input jack on the control panel.

Preparations:

•For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to use – EXT IN” on page 28.)

•If the input level of the external component connected to the AUX jack is not high enough, increase the input level properly. (See “To adjust the auiliary input level – AUX ADJ” on page 28.)

1 Select the external component (LINE IN or AUX IN).

To select “LINE IN” (component connected to the CD changer jack on

the rear), press CD CD-CH (AUX)

repeatedly.

•If “LINE IN” does not appear on the display, see page 28 and select the external input (“LINE IN”).

•Displayed only when one of the following sources is selected – FM, AM and CD.

To select “AUX IN” (component connected to the AUX jack on the control panel), press and

hold CD CD-CH (AUX).

2 Turn on the connected component and start playing the source.

3 Adjust the volume.

CD	4 Adjust the sound characteristics
LINE IN
		you want. (See pages 22 – 24.)
	Note on One-Touch Operation:
	When you press CD CD-CH (AUX), the power
	automatically comes on. You do not have to press
		to turn on the power.

32