Remote control operation
Switching the input signal
You can switch the input method manually by pressing the COMPUTER, WIRELESS (PT- LB51NTE only) and VIDEO buttons. Press the required button several times or I H to cycle through the input methods as follows. The actual projected image will be changed in a while.
Pressing the COMPUTER button
COMPUTER1 |
|
|
| COMPUTER2 |
|
|
| ||
|
|
|
|
|
NOTE:
•Only when the COMPUTER2 SELECT is set to INPUT, you can switch between COMPUTER1 and COMPUTER2.
Pressing the WIRELESS button
The WIRELESS button is only for
Pressing the VIDEO button
VIDEO |
|
|
| |
|
|
| ||
|
|
|
|
|
Pressing the INPUT SELECT button on the projector
COMPUTER1 |
|
|
|
| COMPUTER2 | ||||||||
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WIRELESS |
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VIDEO |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WIRELESS is only for
Basic
NOTE:
•See “List of compatible signals” on page 46.
•See “Connections” on page 18.
Operation
Capturing an image
When projecting an image, press FREEZE to capture the projected image and display it on the screen as a still picture. Press again to escape. While the image is frozen, the sound will be stopped.
NOTE:
•Press the FREEZE button to return to the projection.
•When FUNCTION BUTTON is set to "FREEZE" (see “FUNCTION BUTTON” on page 36), the FREEZE operation can also be carried out by pressing the FUNCTION button at the front of the projector.
Stopping the projection temporary
The “SHUTTER” function can be used to momentarily turn off the picture and sound from the projector when the projector is not being used for short periods of time, such as during breaks in meetings or when carrying out preparation. The projector uses less power in “SHUTTER” mode than it does in normal projection mode.
NOTE:
•Escaping from the shutter mode is available by pressing any button.
•This operation can also be carried out using the SHUTTER command in the MAIN MENU.
See “SHUTTER” on page 38.
•When FUNCTION BUTTON is set to "SHUTTER" (see “FUNCTION BUTTON” on page 36), the SHUTTER operation can also be carried out by pressing the FUNCTION button at the front of the projector.
