Panasonic PV-D4761 Record using DECK buttons, Press CH / , or NUMBER keys to select the channel

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

Record on a Tape

1 Insert a tape with a record tab (p. 6).

• DECK power comes on.

The VCR mode and “VCR” Indicator light up on Multi Function Display.

2 Press CH / , or NUMBER keys to select the channel.

•For “LINE” input, see p. 39.

•If channels is over 100, press 100 key then press the remaining 2 digits.

3 Press SPEED

to select the record speed (p. 6).

SP = Standard Play	LP = Long Play
SLP = Super Long Play

• Speed appears on-screen and on Multi Function Display.

4 Press REC

to start recording.

(The VCR REC Indicator lights up on Multi Function Display),

•To edit out unwanted scenes, press PAUSE/STILL to pause, and again to resume recording.

•You cannot view another channel during recording.

This video recorder, equipped with HQ (High Quality) system, is compatible with existing VHS equipment. Only use

tapes with the mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended.

Note

Remove loose or peeling
labels from tapes	Basic Operation
to prevent tape jam.

	Press STOP
5 to stop recording.
	One Touch Recording (recording in progress),
			Normal Rec
						0:30		1:00
	--> Press REC repeatedly to set the recording length
	(30 min. ~ 4 hours).
		4:00		3:00	2:00		1:30

• DECK shuts off after the preset record length.

Record one station, watch another,

-->press VCR/TV

(“VCR” goes out on Multi Function Display), --> select channels at TV (recording continues).

Select channels at DECK, -->press VCR/TV

(“VCR” lights up on Multi Function Display), --> select channels at DECK.

Play a disc while recording a tape.

--> insert a disc during recording,

--> press DVD, and then press PLAY.

Notes

•It is not possible to record from DVD/ Video CD/ CD to VHS tape using DECK.

•Watching one channel and recording another is not possible when using Cable Box or DSS Receiver.

•After 5 minutes in Pause mode, DECK stops to protect a tape and video heads.

Record using DECK buttons

1Insert a tape.		4 Press REC
		to start
	VCR/TV	Recording.

2 Select	Multi Function Display
Channel.
	Press STOP/EJECT to stop.

21