Panasonic PV-D4761 Tape Position and Tape Status Feature, Remote WARNING, Press Tape Position

Special VCR Features (continued)

*Important: If a remote control button does not work

Remote Warning Featurewhen pressed, press the VCR button on the remote and try the button again.

If Multi-brand feature is used (p. 32), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV, DSS or CABLE mode.

	Press ACTION*
1 to display MENU.
2			MENU			Press
		SET UP DVD				to select “SET UP VCR,”
		SET CLOCK
		SET UP VCR
		SET UP CHANNEL				and
		IDIOMA/LANGUE : ENGLISH				press SET.
		VCR’S OUTPUT CH:3
		SELECT :		SET : SET
		EXIT	: ACTION
3			SET UP VCR			Press
	REPEAT PLAY				: OFF	to select
	REMOTE WARN I NG				: ON	“REMOTE WARNING,” and
	AUTO SHUT-OFF				: ON
						press SET
		SELECT :		SET: SET		to set “ON” or “OFF.”
		EXIT	: ACT I ON

• If “OFF,” remote warning will not appear when invalid key is pressed.

4 Press ACTION twice

to return to normal screen.

Tape Position and Tape Status Feature

To find out the present tape position and amount of tape remaining.

Tape position cannot be detected for VHS-C Cassettes, tapes under 30 minutes, and some other tapes.

1 Press TAPE POSITION

to detect current tape position.

INPUT

STOP

PAUSE/ STILL

ACTION

SELECT

SET

TAPE POSITION

REC

DETECTING TAPE POSITION

SP

•“DETECTING TAPE POSITION” is displayed only when a cassette is first inserted, and it takes several seconds for correct tape position to appear.

•The present tape position indication and amount of tape remaining (according to tape speed) is displayed.

•Tape remaining time display may not be precise.

R 70 MIN.

BEGIN END

Note

•This function cannot display exact amount of tape remaining for tapes 30 minutes or less, or for tapes over 120 minutes in length.

38 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com