Panasonic PV-D4761 Copying Your Tapes Dubbing, VCR Operation, Dvd/Vcr Deck, Playing Source VCR

Models: PV-D4761

1 64
Download 64 pages 9.24 Kb
Page 39
Image 39
Copying Your Tapes (Dubbing)

Copying Your Tapes (Dubbing)

Connection

VCR/ Camcorder (Hi-Fi)

DVD/VCR DECK

OUT

OUT

IN1 IN FROM ANT.

VIDEO

VIDEO

VHF/UHF

AUDIO L

AUDIO1L

OUT TO TV

R

R

 

TV

VHF/

UHF

Front of DECK

VIDEO IN 2 L-AUDIO IN2-R

(Audio/Video In Terminals on the front of DECK are available)

1Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK. To monitor the dubbing, also connect TV as shown.

Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R”

2AUDIO IN terminals on DECK.

In place of Playing VCR, you can use other equipment, such as Camcorder. Simply connect the unit’s Audio/Video outputs to DECK.

Playing (Source) VCR

Recording (Editing) DECK

1 Insert a pre-recorded tape.

Insert a blank tape with record tab.

2

 

 

 

Press INPUT to set DECK Input mode to

 

 

 

LINE for Video Input.

 

 

 

 

(See “Selecting the Input Mode” below.)

 

 

 

 

 

 

 

Press PLAY, then PAUSE/STILLPress REC, then PAUSE/STILL

3 immediately to enter PLAY/PAUSE

immediately to enter REC/PAUSE

 

mode.

mode.

 

 

The operation of steps 4 and 5 must be done on both

 

4

 

playing and recording VCRs at the same time.

 

Press PLAY to start dubbing.

Press PAUSE/STILL to start dubbing.

Playing VCR starts playback.

DECK starts recording.

5

Press STOP to stop dubbing.

Press STOP to stop dubbing.

VCR Operation

VCR/ Camcorder (Hi-Fi)Front of DECK To Monitor Dubbing on TV

1Turn TV on and tune to the Recording VCR channel (CH 3 or CH 4).

2Set the VCR/TV Selector on DECK to “VCR.”

Note

• Dubbing tapes protected with Copy

Guard will have poor quality results.

 

Playing (Source) VCRRecording (Editing) DECK Selecting the Input Mode

Method 1: Press INPUT repeatedly.

Channel Number <--> LINE1 <--> LINE2

Method 2: Press CH Press PLAY, then PAUSE/STILL/ Press REC, then PAUSE/STILL .

Display will change as below.

1

2

3

 

 

(CABLE) (TV)

LINE2

LINE1

125 or 69

“L1” or “L2” lights up on Multi Function Display (about 4 seconds) when LINE1 or LINE2 is selected.

LINE1: For rear audio/video connection.

LINE2: For front audio/video connection.

Caution: • Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.

Please note that some tapes cannot be dubbed on DECK. Also, it is not possible to dub DVD/ Video CD/ CD to VHS tapes using DECK.

39

Page 39
Image 39
Panasonic PV-D4761 Copying Your Tapes Dubbing, VCR Operation, Dvd/Vcr Deck, Playing Source VCR, Recording Editing DECK