Panasonic PV-D4762 operating instructions Settings for DVD Operation, Audio Output

Settings for DVD Operation (continued)

Audio Output

Select the digital output to be output from the optical digital audio output connector of DECK.

	Press			ACTION				*
1to display MENU.
2				DVD	MAIN		MENU		Press
		AU DI O		OUTPUT					to select
		DISC	LANGUAGES
		ST I LL	MODE		: F		I LED		“AUDIO OUTPUT,”
		TV MODE				:	L e t t e r b o x 4 : 3
		P A R E N T A L		L O C K			: L E V E L 8		and
		SELECT		:	: SET				press	SET
		SET							to display	screen.
		END			: ACTION
3				AUDIO		OUTPUT			Press
		D o l b y D i g i t a l				: B i t s t r e a m			to select	an item,
		LPCM(DVD)					: OFF
		LPCM(DVD)					: OFF
		d t s					: OFF		and
		DRC				: OFF
		SURROUND			: OFF				press	SET
		SELECT		:	: SET				repeatedly	for
		SET							output. (See below.)
		END			: ACTION

■“LPCM (DVD)” selections

OFF: Linear PCM of less than 48 kHz/16 bit is output. When playing DVDs recorded in

linear PCM of over 48 kHz/20 bit or 96 kHz, no digital audio is output. (Factory preset)

PCM: When playing DVDs recorded in linear PCM

of 48 kHz/20 bit/24 bit or 96 kHz, digital audio converted to 48 kHz/16 bit is output. (Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright protection.)

■“Dolby Digital” selections

Bitstream:	Dolby Digital bitstream (1ch-5.1ch) is
OFF:	output. (Factory preset)
	No output.

■“dts” selections

Bitstream:	dts	bitstream is output. (Factory	preset)
OFF:	No	output.

■“DRC(DynamicRangeCompression)”selections

OFF: Normal audio range is selected. (Factory preset)

ON: For dynamic sound even at low volume, this

is useful for late-night listening. [Dolby Digital DVDs only].

■“SURROUND” selections

Surround Sound creates the effect of sound coming from non-existent rear speakers even when only connected to a 2-channel stereo system.

OFF: No Surround Sound effect. (Factory preset)

ON: Surround Sound effect.

4	Press	ACTION		to redisplay DVD menu
	and go to step 2 to setup another item.
	Or,	press	ACTION	twice to exit.

Ready Checklist

DECK is in DVD mode, press DVD.

Type of amplifier	Recommended setting
	LPCM		Dolby
to be connected				dts
	(DVD)		Digital
No amplifier is connected	OFF		OFF	OFF
AV amplifier (with digital
audio input connector)	PCM*	1	OFF*2	OFF*2
without Dolby Digital/dts
decoder
AV amplifier including	PCM*	1	Bitstream	OFF
Dolby Digital decoder
AV amplifier including				3
Dolby Digital/dts decoder	PCM*	1	Bitstream	Bitstream *

•Make settings according to amplifier connected to optical audio output as shown in above table.

•When a dts decoder is not connected, to enjoy dts DVD, please select audio output other than dts at the dts DVD menu screen. Otherwise, there will be no sound.

*1 Audio Output 2 from DECK is converted to

48 kHz/16 bit in addition to audio from digital audio output.

To enjoy high quality sound at 48 kHz/20 bit /24 bit or 96 kHz, connect the amplifier or decoder directly to the Audio Output 2 connectors, not to the Digital Audio Output connector. [Select “OFF” at the “LPCM (DVD)”.]

*2 When connecting an amplifier (with an optical digital input connector) which does not contain the Dolby Digital or dts decoder, be sure to select “OFF”.

If “Bitstream” is selected, starting DVD play may cause such a high level of noise as to

be harmful to your ears and damage the speakers.

*3 When a dts decoder is connected, please

select “Bitstream” in “dts”. If “OFF” is selected, there will be no sound.

Notes

•Turn off other surround effects when using this surround effect.

•For optimum effect, the distance between DECK and the listener should be about 3 or 4 times the distance between the right and left front speakers.

50 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com