Panasonic PV-D4762 Before doing Initial Setup, Doing Initial Setup Ready to Play

Initial Setup for Basic Connections (Ready to Play)

Before doing Initial Setup

1Turn TV on			.
2	See connections		a RF Coaxial Cable Connection and		b AV Cable Connection on p. 12.
	<RF Coaxial Cable Connection>
	Set	TV to	channel 3.
	<AV Cable Connection>
3	Set	TV to	VIDEO.
	[DECK	➛ TV]
	• Go to “Doing Initial Setup (Ready to Play).” (See below.)
	[Cable Box		➛ DECK	➛ TV], [DSS ➛ DECK	➛ TV]

•Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone.

•If you use a DSS Receiver, it must be turned off.

Doing Initial Setup (Ready to Play)

1Press VCR on remote for VCR mode.

2 Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel and clock set starts.

•If screen below does not appear, check DECK - TV connection and, if TV is tuned to channel 3, try switching it to channel 4.

•To change VCR’s output channel, please refer to “VCR’s Output Channel” on p. 19.

Plugging the AC Power Plug into an AC outlet

CH AUTO SET PROCEEDING

CANCEL : STOP

AUTO CLOCK SET

PROCEEDING

CANCEL : STOP

16 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com