Panasonic PV-D4762 Audio Mode for Recording, Audio Mode for Playback, 1Press Audio SAP/Hi-Fi

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

Audio Mode for Recording

1Press AUDIO (SAP/Hi-Fi)

to display audio mode.

(Display disappears after 5 seconds.)

2		Press AUDIO (SAP/Hi-Fi)	repeatedly
	STER EO	to select desired mode.
	SAP

M ONO

•Refer to “Receivable Broadcast Types” on p. 26.

•Arrow indicates selection.

3 Do a recording. See p. 21.

Audio Mode for Playback

1Start playback. See p. 20.

2	Press AUDIO (SAP/Hi-Fi)
	to display audio mode.

VCR Operation

3 H I F I : L /R

HI F I : L H I F I : R N ORM AL

•Arrow indicates selection.

Press AUDIO (SAP/Hi-Fi)	repeatedly
to select desired mode.

•Select “HIFI (L/R)” or “HIFI (L)” or “HIFI (R)” to listen to stereo recordings in stereo sound.

Select “NORMAL” for monaural sound.

•Display disappears after 5 seconds.

Notes

•Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes will playback in monaural sound.

•	To listen to Hi-Fi stereo playback	, the DECK AUDIO (L/R) jacks must be connected to
a	stereo TV or an external stereo amplifier	and speakers. (See pp. 12, 14, 15.)

•If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.

•Hi-Fi and normal audio playback volume level may differ.

27