Brother HL-1260E manual IBM Proprinter XL Mode, DC1 ESC Q

APPENDICES

IBM Proprinter XL Mode

Command name	Function	Sequence	Decimal	Hexadecimal
Null	Ignored	NUL	0	00
Bell	Ignored	BEL	7	07
Space	Moves the cursor one character to the right	SP	32	20
Backspace	Moves the cursor one character to the left	BS	8	08
Line Feed	Moves the cursor to the next line	LF	10	0A
Form Feed	Prints the data in the buffer and ejects the	FF	12	0C
	page (if the buffer is empty, this command
	is ignored)
Carriage Return	Moves the cursor to the left margin on the	CR	13	0D
	current line. If Auto LF has been set from
	the front panel or by software (ESC 5 1),
	the cursor will move down one line
Set/Cancel Auto	Sets (n=1) or cancels (n=0) auto line feed	ESC 5 n	27 53 n	1B 35 n
Line Feed Mode	Overrides the front panel setting
Select Printer	Selects printer following deselection	DC1	17	11
	(ESC Q)
Deselect Printer	Ignored	DC3	19	13
Deselect Printer	Deselects printer, which will not accept	ESC Q 2 2	27 81 50 50 1B 51 32 32
	data until a DC1 is received	ESC Q 3	27 51 51	1B 51 33
Set Epson	Selects Epson FX-850 emulation mode.	ESC @	27 64	1B 40
Emulation Mode	All data in the buffer is printed and the
	page ejected
Change Emulation	Changes the emulation of the printer. All	ESC CR m	27 13 m	1B 0D m
(original)	data received so far will be printed and
	the page ejected. m is an ASCII code.
	m=AB - BR-Script 2 Batch Mode
	m=AI - BR-Script 2 Interactive Mode
	m=E - Epson Mode
	m=GL - HP-GL Mode
	m=H - HP LaserJet 4+ Mode
	m=I - Reset IBM Proprinter Mode
User Reset	Restore to User Settings	ESC CR !	27 13 33	1B 0D 21
	(n=0 to 2)	n R	n 82	n 52
Paper Input Control	Controls the paper input	ESC EM n	27 25 n	1B 19 n
	n=0 - Feed From Manual Feed Slot
	n=1 - Feed From MP Tray
	n=2 - Feed From Upper Cassette (Tray 1)
	n=3 - Feed From Lower Cassette (Tray 2)
	n=R - Eject Paper
Duplex/Simplex Print	Sets simplex or duplex print mode	ESC CR !	27 13 33	1B 0D 21
(available when duplex n=0 - Simplex		n D	n 68	n 44
unit is installed)	n=1 - Duplex & long edge binding
(original)	n=2 - Duplex & short edge binding
Page Side Selection	Sets page side selection	ESC CR !	27 13 33	1B 0D 21
(available when duplex n=0 - Next side		n S	n 83	n 53
unit is installed)	n=1 - Front side
(original)	n=2 - Back side
Set Form Length	Sets form length to n lines at current	ESC C n	27 67 n	1B 43 n
	spacing (1≤n≤255)
	Sets from length to n inches at current	ESC C 0 n	27 67 48 n	1B 43 30 n
	spacing (0≤n≤15)
Set Right and Left	n1 is used to set the left margin, and n2	ESC X n1 n2	27 88 n1 n2 1B 58 n1 n2
Margins	the right margin (1≤n1≤n2≤255)
Set Skip-over	Sets bottom margin at n-th line, counting	ESC N n	27 78 n	1B 4E n
Perforation	from the bottom (1≤n≤255)

Appendix–61