USER’S GUIDE
When the installed flash memory card or HDD card is formatted:
When you enter this mode menu with the formatted flash memory card or
HDD card installed, the display shows the following menus:
Display Message | Flash Operation |
EXECUTE DATA Select the data ID and execute the selected data. This menu appears only when any data has been saved on the card.
CARD LIST
Print out the contents of the flash memory card or the HDD card. This menu appears only when anything has been saved in the card.
SAVE | Save received data, macros, and fonts. |
DELETE | Delete items from the card. |
✒Note
A common use of the flash memory is with FORMS software packages. With these commercially available software packages you have an option to send a form to the printer without any data. After you send the form to the printer, you may save the form in the flash memory as a Macro. Then the next time you want to print this form, you would setup your FORMS software package to SEND DATA ONLY - USE FORM IN PRINTER. This process would save you anything from 1 to 4 minutes per print job.
Select the setting menu and enter the
■Execute Data
✒Note
This menu appears only when data has been saved on the card.
When you select “EXECUTE DATA,” you can execute any of the data saved in the SAVE DATA mode.
When you enter this
DATA ID=#####
Select the ID with the ▲ or ▼ switch and press the SET switch again, so that the printer executes the selected data.
