Brother HL-1260E manual Interface Mode =PARALLEL High SPEED=ON

USER’S GUIDE

MODE Switch Settings in HP LaserJet 4+, EPSON FX-850, and

IBM Proprinter XL Modes

The following table shows all the selections you can make with the MODE switch in the HP LaserJet 4+, EPSON FX-850, and IBM Proprinter XL modes.

✒Note

The mode menus and settings that can appear vary according to the current emulation mode, printer status, and any options that may be installed in the printer.

Mode Menu	Setting Menu	Sub-Setting Menu			Setting
INTERFACE MODE	I/F=PARALLEL	HIGH SPEED=ON			ON or OFF
(See 4-17.)		BI-DIR=ON			ON or OFF
	I/F=RS-232C	BaudRate= 9600			150, 300, 600, 1200, 2400,
					4800, 9600, 19200, 38400,
					57600, or 115200 baud
		CodeType=8 bits			7 or 8 bits
		Parity =NONE			NONE, EVEN, or ODD
		Stop Bit=1 bits			1 or 2 stop bits
		Xon/Xoff=ON			ON or OFF
			DTR (ER)=ON		ON or OFF
			Robust Xon=OFF		ON or OFF
		exit			Exit to INTERFACE MODE
	I/F=OPTION	Available only when a commercial MIO card has been installed.
		MIO Setting			The settings available on the
					installed MIO card can appear
					under the sub-setting menu.
		exit			Exit to INTERFACE MODE
	I/F=AUTO	TIME OUT= 5s			1 to 99 seconds
		PRL Setting			Bi-directional settings for
					AUTO
			HIGH SPEED=ON		ON or OFF
			BI-DIR=ON		ON or OFF
			exit		Exit to PRL Setting
		RS-232C Setting			Parameters for AUTO mode
			BaudRate= 9600		150, 300, 600, 1200, 2400,
					4800, 9600, 19200, 38400,
					57600, or 115200 baud
			CodeType=8 bits		7 or 8 bits
			Parity =NONE		NONE, EVEN, or ODD
			Stop Bit=1 bits		1 or 2 stop bits
			Xon/Xoff=ON		ON or OFF
				DTR (ER)=ON	ON or OFF
				Robust Xon=OFF	ON or OFF
			exit		Exit to RS-232C Setting

4–8