Brother HL-1260E manual Format Mode Orientation ORI=PORTRAIT

			CHAPTER 4 CONTROL PANEL
Mode Menu (Continued)	Setting Menu	Sub-Setting Menu	Setting
INTERFACE MODE	I/F AUTO	MIO Setting	Available only when a
(Continued)	(Continued)		commercial MIO card has been
			installed. The settings available
			on the installed MIO card can
			appear under the sub-setting
			menu.
FORMAT MODE	ORIENTATION	ORI=PORTRAIT	PORTRAIT or LANDSCAPE
(See 4-20.)	AUTO MODE	AUTO LF=OFF	ON … LF + CR
			OFF … CR only
		AUTO CR=OFF	ON … LF, FF, or VT + CR
			OFF … LF, FF, or VT only
		AUTO WRAP=OFF	ON … Auto wrap on
			OFF … Auto wrap off
		AUTO SKIP=ON	ON … Auto FF at bottom
			margin
		(HP mode)	OFF … No FF at bottom
			margin
		AUTO MASK=OFF	ON … Auto mask on
		(EPSON & IBM modes)	OFF … Auto mask off
		exit	Exit to AUTO MODE
	PAGE FORMAT MODE	PAPER =LETTER	LETTER, LEGAL, A4, A5,
		(For 110/120V model)	A6, B5, B6, EXECUTIVE,
		PAPER =A4	COM10, MONARCH, C5 and
		(For 220/240V model)	DL
		LEFT M = 0C	0 to 126 columns
		RIGHT M = 80C	10 to 136 columns
		(Letter, Portrait)
		RIGHT M = 78C	10 to 136 columns
		(A4, Portrait)
		TOP M =0.5” (HP mode)	0, 0.33, 0.5, 1.0, 1.5, or 2.0”
		BOTTOM M=0.5”	0, 0.33, 0.5, 1.0, 1.5, or 2.0”
		(HP mode)
		LINES = 60L	5 to 128 lines/page
		(HP, Letter, Portrait)
		LINES = 64L	5 to 128 lines/page
		(HP, A4, Portrait)
		X OFFSET= 0	-500 (left) to +500 (right) dots
		Y OFFSET= 0	-500 (down) to +500 (up)
			dots
		exit	Exit to PAGE FORMAT MODE
	exit		Exit to FORMAT MODE
RESOLUTION MODE	RESOLUTION	RESOLUTION	300 or 600 dpi
(See 4-28.)	HRC SETTING	HRC=MEDIUM	OFF, LIGHT, MEDIUM, or DARK
	exit		Exit to RESOLUTION MODE
PAGE PROTECTION	PROTECT=AUTO		AUTO, OFF, LETTER, A4, or
(See 4-31.)			LEGAL
CARD OPERATION	When the commercial flash memory card or the HDD card has not been formatted:
(HP mode only)	FORMAT CARD		Format the flash memory card or the
(See 4-32.)			HDD card.
	exit		Exit to CARD OPERATION

4–9