CHAPTER 4 CONTROL PANEL
If the function is turned on, the downloaded macros and fonts are kept in the printer’s memory until the printer is turned off, so that they are not cleared by switching the emulation to the
✒Note
The “KEEP PCL” function reserves free space in the printer’s memory and may cause a memory full error. If a memory full error occurs, expand the memory capacity or turn off this function.
10.Press the SET switch.
The “exit” message appears on the display.
11.Press the SET switch again.
The printer exits from the setting mode to the
✒Note
When you use the automatic emulation selection, try it with your application software or network server. If the function does not work properly, select a particular emulation mode manually. You can use the following commands to select the emulation on the network.
Commands | Hex | Emulation |
ESC CR H | 1B 0D 48 | HP LaserJet 4+ |
ESC CR AB | 1B 0D 41 | 42 |
ESC CR GL | 1B 0D 47 | 4C |
ESC CR E | 1B 0D 45 | EPSON |
ESC CR I | 1B 0D 49 | IBM Proprinter XL |
About Emulation Modes
This printer has the following emulation modes:
■HP LaserJet 4+ Mode
The HP LaserJet 4+ mode (or HP mode) is the emulation mode where this printer emulates the
