CHAPTER 4 CONTROL PANEL
∙If you turn the printer off or remove the flash memory card or the HDD card while data is being written onto or deleted from the card, all the data on the card may be lost.
∙If the write protect switch of the flash memory card or the HDD card is on, this mode menu does not appear.
Be sure to install a commercial flash memory card or HDD card in the upper card slot of the printer. For installation, see “FONT CARTRIDGE/CARD, FLASH MEMORY/HDD CARD” in Chapter 5.
When you are in this mode menu, you can save macros and fonts in the installed flash memory card or the HDD card.
The
When the installed card is not formatted:
When you enter this mode menu with the flash memory card or the HDD card installed but not formatted by this printer, you must first format the card.
Display Message | Card Operation |
FORMAT CARD | Format a new flash memory card or HDD |
| card. |
|
|
exit | Exit to CARD OPERATION |
When the display shows “FORMAT CARD,” press the SET switch to format the installed card.
After the printer finishes formatting the card, you exit to the “CARD OPERATION” menu.
✒Notes
∙If the card is formatted, data that has been previously written is erased.
∙It takes ten or more seconds to format a
