USER’S GUIDE

Removing the Protective Parts

After checking that you have all of the correct parts, temporarily place the printer where you can easily reach all sides. Remove the protective parts that secure the printer against damage during transportation, as shown below:

Note

Keep all packing materials for transporting or storing the printer later.

1.Open the top cover and the upper paper cassette.

2.Remove the protective parts from inside the printer and the cassette.

3.Remove both spacers from the fixing roller.

Protective Parts

Fig. 2-7 Removing the Protective Parts

Spacers

Fig. 2-7 Removing the Protective Parts

Fig. 2-8 Removing the Spacers

2–6

Page 32
Image 32
Brother HL-1260E manual Removing the Protective Parts