Brother HL-1260E manual Card List

USER’S GUIDE

Mode Menu (Continued)	Setting Menu	Sub-Setting Menu			Setting
CARD OPERATION	When the commercial flash memory card or the HDD card has been formatted:
(HP mode only)	EXECUTE DATA				Execute the data on the card.
(See 4-32.)		DATA ID=#####			Execute the selected data.
		exit			Exit to EXECUTE DATA
	CARD LIST				Print the contents of the card.
	SAVE	SAVE DATA			Send data to be saved.
				SET KEY--> END	End saving the data.
				DATA ID=#####	Set data ID for saved data.
		SAVE MACRO			Save a macro.
				MACRO ID=#####	Set macro ID for saved macro.
		PRIMARY FONT			Save primary font.
				FONT ID=#####	Set primary font ID for saved font.
		SECONDARY FONT			Save secondary font.
				FONT ID=#####	Set secondary font ID for saved
					font.
		DOWNLOAD FONT			Save download font.
				FONT ID=#####	Set download font ID for saved
					font.
		exit			Exit to CARD OPERATION
	DELETE	MACRO ID=#####			Delete the selected macro.
		DATA ID=####			Delete the selected data.
		FONT ID=#####			Delete the selected font.
		FORMAT CARD			Format the flash card.
				SET –> DELETE ALL	Execute formatting the card.
				exit	Exit to FORMAT CARD
	exit				Exit to CARD OPERATION
ADVANCED MODE	NETWORK MODE	LOCK PANEL=OFF			ON or OFF
(See 4-41.)			PASS NO=###		Enter pass number.
		AUTO FF=OFF			ON or OFF
			WAIT TIME= 5s		1 to 99 seconds for AUTO ON
		FF SUPPRESS=OFF			ON or OFF
		TONER LOW=CONT			CONT or STOP
		exit			exit to NETWORK MODE
	CONTINUE MODE	CONTINUE=MANUAL			AUTO or MANUAL
	BUZZER SETTING	BUZZER=ON			ON or OFF
	SCALABLE FONT	FONT=ALL			ALL, LJ4
	PRINT DENSITY	■■■■■			Increase or decrease the print
					density. (15 levels)
	INPUT BUFFER	❏❏❏❏❏			Increase or decrease the input
					buffer capacity. (15 levels)
	SAVE SETTINGS	SAVE SETTING 1			Save the current setting as #1
		SAVE SETTING 2			Save the current settings as #2
	exit				exit to ADVANCED MODE
PAGE COUNTER	COUNT= 0				Shows the number of printed
(See 4-48.)					pages.
exit MODE					Exit MODE.
(See 4-48.)

4–10