Brother HL-1260E manual Paper =LETTER, Left M, Right M = 80C P, Top M, Lines, Offset=

CHAPTER 4 CONTROL PANEL

The following settings can be made in this mode:

Display Message		Page Format Mode
PAPER	=LETTER	Set cut sheet paper size to letter, A4, legal,
		B5, A5, B6, A6, or executive, or envelope
		size to COM10, Monarch, C5, or DL.
LEFT M	= 0C P	Set the left margin at column 0-126 at 10cpi.
RIGHT M = 80C P		Set the right margin at column 10-136 at
		10cpi. See “List of Factory Settings” in this
		chapter.
TOP M	=0.5" P	Set the top margin at a distance from the top
		edge of the paper: 0, 0.33, 0.5, 1.0, 1.5, or
		2.0 inches. factory setting = 0.33 (Non-
		HP), 0.5 (HP)

BOTTOM M=0.5" P Set the bottom margin at a distance from the

	bottom edge of the paper: 0, 0.33, 0.5, 1.0,
	1.5, or 2.0 inches. factory setting = 0.33
	(Non-HP), 0.5 (HP)
LINES	= 60L P Set the number of lines per page from 5 to
	128 lines. See “List of Factory Settings” in
	this chapter.

The letter “P” in the display messages indicates that the page orientation is portrait. The letter “L” is displayed when it is landscape.

Display Message		Page Format Mode (Continued)
X OFFSET=	0	Move the print start position (at the upper
		left corner on pages) horizontally up to
		-500 dots to the left or +500 dots to the right
		in 300dpi dot unit increments: factory
		setting = 0.
Y OFFSET=	0	Move the print start position (at the upper
		left corner on pages) vertically up to -500
		dots downward or +500 dots upward in
		300dpi dot increments: factory setting = 0.

4–23