Konica Minolta C550 manual When first used, Network connection, Network settings

Before using scanning functions

1

1.3When first used

The network connections and settings must be specified before the network scanning functions can be used. Any other settings should be specified as necessary.

Network connection

Connect a UTP cable (category 5 or later recommended) from the network to the Ethernet connector on the machine.

Network settings

Assign an IP address to the machine and complete settings for the SMTP server, etc. For details, refer to “Network Settings” on page 4-2.

Specifying the E-Mail address of the machine

To send scanned data as an E-Mail message or to use the Internet fax func- tion, register the E-Mail address on the machine beforehand. This E-Mail ad- dress is used when sending and receiving data. Generally, it is recommended that the E-Mail address registered for the administrator be used.

If the E-Mail address registered for the administrator is not specified, the E- Mail address of the sender must be entered for each Scan to E-Mail opera- tion. Scan to E-Mail operations are not possible without address entry.

C550 1-10