Konica Minolta C550 manual Mail TX Smtp screen 1/5

Network Settings

4

4.9E-Mail TX (SMTP)

Information, such as the SMTP server, that is required to send data as an e- mail attachment in Scan mode can be specified. In addition, authentication settings can be specified for e-mail transmission. Settings can be specified for the following.

!

Detail

For sending e-mail, administrator address must be specified on this ma- chine. For details on the administrator address setting, refer to the User’s Guide [Copy Operations].

E-Mail TX (SMTP) screen 1/5

Parameter	Description
Scanning	Select whether or not Scan to E-Mail operations are used.
Status Notification	Select whether or not status notification is used.
Total Counter Notification	Select whether or not total counter notification is used.
E-Mail TX (SMTP) screen 2/5

Parameter	Description
SMTP Server Address	Specify the address of the SMTP server used to send e-mail mes-
	sages. For details, refer to “SMTP Server Address” on page 4-80.
E-Mail TX (SMTP) screen 3/5
Parameter	Description
Binary Division	Specify whether or not a large e-mail message is divided and sent
	in small sections. This is used to send data that has exceeded the
	maximum capacity when the maximum capacity is limited per e-
	mail message on the e-mail server.
Divided Mail Size	Specify the size of divided data when dividing the data to be sent.
	To change the setting, press the [C] (clear) key, and then use the
	keypad to type in the desired setting. (Range: 100 to 15000 KB)

Note

It may not be possible to read the e-mail messages if the e-mail software used to receive e-mail is not equipped with a restoring function.

C550 4-74