Scanning
2
3 Using the keyboard that appeared in the touch panel, type in the doc- ument name.
–The document name can contain a maximum of 30 characters.
–To stop registering the document name, press the [Reset] key.
–For details on typing in text, refer to “Entering text” on page
4 Touch [OK].
Original Settings
Specify the type of document that is loaded, for example, if it contains mixed page sizes or is folded in a zigzag.
Parameter | Description |
Mixed Original | Select this setting when documents of different sizes are loaded into |
| the ADF (optional). The scan speed is decreased since the size of each |
| page is detected before it is scanned. |
|
|
Select this setting to detect the size of a | |
| the length fed through the ADF. |
|
|
Long Original | Select this setting for documents that are longer than the standard |
| size. |
|
|
Original Direction | Select the orientation of the document. After the document is |
| scanned, the data is processed so that it is correctly oriented. |
|
|
Binding Position | Select the binding position, such as when holes are punched in the |
| document or the document is stapled. In addition, specify the binding |
| position when a |
| This adjusts the scan of |
| position is not reversed. |
| Left Select this setting for a document with binding on the left side. |
| Top Select this setting for a document with binding at the top. |
| Auto The binding is on the long side if the page is 297 mm or less, or |
| it is on the short side if the page is more than 297 mm. |
|
|
Despeckle | Select this setting to reduce the effect that dust on the left partition |
| glass has on images when the document is loaded into the ADF. |
|
|
C550 |
