Konica Minolta C550 11 S/MIME Communication Settings, Before specifying settings to use S/MIME

Network Settings

4

4.11S/MIME Communication Settings

Before specifying settings to use S/MIME

By specifying settings for S/MIME communication, e-mail messages can be sent encrypted. In order to enable the S/MIME settings, a digital certificate for each destination must be registered. Digital certificates can be registered using any of the following three methods.

Method	Description
Registering certificates by	The certificate is registered by sending an e-mail message to this
sending e-mail messages	machine from the client computer to be the e-mail destination. The
to this machine	procedure is described below.
Registering certificates	Certificate files registered on the LDAP server are searched for and
with the LDAP server	retrieved. For details, contact the network administrator.
Specifying the setting	Specify where certificate information is saved when using Page-
when using PageScope	Scope Web Connection to register the destination. For details, re-
Web Connection to regis-	fer to the PageScope Web Connection User’s Guide.
ter destinations

The following procedure describes how to register certificates by sending e- mail messages to this machine.

Note

Register the e-mail address as a destination that uses S/MIME transmis- sion.

Before sending e-mail, the “Automatically Obtain Certificates” parameter (available from the S/MIME Communications Settings screen) must first be set to “Yes”.

1 From the machine’s control panel, register in the address book an e- mail address registered with a certificate.

C550 4-91