Specifying Utility mode parameters
3
9 Touch [Password], and then type in the password, using the keyboard that appears.
10
11
12
Touch [OK].
Touch [↑] or [↓].
New screen 2/3 appears.
Touch [Host Address], and then type in the IP address or host name.
–To enter a host name, touch [Host Name Input], and then type in the host name, using the keyboard that appears.
–To enter an IP address, touch [IPv4 Address Input] or [IPv6 Address
Input], and then type in the address, using the keypad or the number buttons that appear. Touch [←] or [→] to move the cursor to the desired position, and then type in the numbers.
–When the input format is switched to entering an IP address after the host name was entered, the host name is cleared.
–If [Host Name Input] is touched after the IP address was entered, the entered IP address is saved and the input screen appears.
–Type the host name and file path in uppercase letters.
–When sending an SMB transmission using an IPv6 address, set “Di- rect Hosting Setting” to “ON”. For details, refer to “Direct Hosting Setting” on page
13
14 Touch [File Path], and then type in the file path, using the keyboard that appears.
–To check the contents of the shared folders, touch [Reference].
C550 |
