
CHAPTER 4 CONTROL PANEL
BUZZER SETTING
You can turn the buzzer of this printer on or off. If any errors occur and the buzzer is turned on, the printer beeps to alert you. If it is turned off, it does not sound to alert you.
Display Message | Buzzer |
BUZZER=ON | Turn on the buzzer. (Factory setting) |
|
|
BUZZER=OFF | Turn off the buzzer. |
SCALABLE FONT
✒Note
The setting in this mode menu is effective only in the HP LaserJet 4+ mode. It does not appear in any other emulation modes.
Since this printer has many scalable fonts, some application programs may not be able to handle them correctly. When the HP LaserJet 4+ emulation mode has been selected, the printer may print a different font rather than the font you have selected with your program (or the font selection command).
To cope with this font problem, you can restrict the font selection by this command as follows:
Display Message | Scalable Font |
FONT=ALL | All scalable fonts of this printer can be |
| selected with the font selection command. |
| For fonts, see “RESIDENT FONTS” in |
| Appendix. (Factory setting) |
|
|
FONT=LJ4 | Scalable fonts of this printer other than the |
| following can be selected with the font |
| selection command: Atlanta, Bermuda |
| Script, PC Brussels, Copenhagen, Germany, |
| Portugal, Calgary, San Diego, and US |
| Roman. |
|
|
Even if you restrict the font selection as above, you can select among all the scalable fonts with the FONT switch. The setting in this mode menu merely restricts the font selection command.