USER’S GUIDE

Operation Example: Selecting the Parallel Interface

For this session, select the parallel interface manually as follows:

1.Press the SEL switch to set the printer off-line.

2.Press the MODE switch.

The display shows the first menu.

INTERFACE MODE

3.Press the SET switch.

When you enter the interface mode, the display first shows the current interface with the asterisk.

I/F=AUTO *

4.Press the or switch until the desired interface appears on the display.

I/F=PARALLEL

Display Message

Interface Mode

I/F=PARALLEL

Parallel interface

 

 

I/F=RS-232C

Serial interface

I/F=OPTION

Optional interface for MIO card

I/F=AUTO

Auto interface selection

Note

The optional interface is available only when a commercial MIO compatible sharing/network card has been installed.

5.Press the SET switch to make the displayed selection effective.

An asterisk appears at the end of the display for a short time. Then the printer automatically exits from the setting menu to the interface menu.

INTERFACE MODE

4–16

Page 83
Image 83
Brother HL-1260E manual =Auto, =Parallel, =RS-232C, =Option, Operation Example Selecting the Parallel Interface