Brother HL-1260E manual Signal Description, Acknlg OUT

APPENDICES

Signal Description

Pin No.	Signal Name		IN/OUT	Explanation
1		DATA STROBE	IN	Data is latched at the leading edge of this
				signal.
2 - 9		DATA 0 - 7	IN	Parallel 8 bit data
10		ACKNLG	OUT	Data reception is completed and the printer is
				ready for the next data reception when this
				signal becomes low.
11		BUSY	OUT	The printer cannot receive data when this
				signal is high. The signal becomes high under
				data receiving, off-line, or error states.
12		PE	OUT	This signal becomes high when a paper empty
				state is detected.
13		SLCT	OUT	This signal becomes high when the printer is
				selected and low when it is deselected.
			IN	This signal is used only for the bi-directional
14		AUTO FEED
				interface.
			IN	This signal is used only for the bi-directional
31		INPUT PRIME
				interface.
			OUT	This signal becomes low when the printer is in
32		FAULT
				the paper empty, off-line, or error states.
			IN	This signal is used only for the bi-directional
36		SLCT IN
				interface.

Appendix–9