Chapter 6: Programming Information | A794 Owner’s Guide |
Select Standard Mode
Switches from page mode to standard mode. In switching from page mode to standard mode, data buffered in page mode are cleared, the printing area set by Set Print Area in Page Mode (ESC W) is initialized and the print position is set to the beginning of the line.
This command switches the settings for the following commands (the values for these commands can be set independently in standard mode and page mode) to those for standard mode:
♦Set
♦Select 1/6 Inch Line Spacing (ESC 2)
♦Set Line Spacing (ESC 3)
Standard mode is automatically selected when power is turned on, the printer is reset, or the Initialize Printer command (ESC @) is used.
ASCII | ESC S |
Hexadecimal | 1B 53 |
Decimal | 27 83 |
Exceptions
This command is effective only in page mode.
114 | March 1999 |