Epson A794-D100 manual Print Characteristics Commands, Select Double-Wide Characters

Chapter 6: Programming Information A794 Owner’s Guide

Print Characteristics Commands

These commands control what the printed information looks like, selection of character sets, definition of custom-defined characters, and setting of margins. The commands are described in order of their hexadecimal codes.

Select Double-Wide Characters

Prints double-wide characters. The printer is reset to single-wide mode after a line has been printed or the Clear Printer (10) command is received. Double-wide characters may be used in the same line with single-wide characters.

ASCII DC2

Hexadecimal 12

Decimal 18

Exceptions

Double-wide characters may not be used in the same line with single or double-density graphics.

Select Single-Wide Characters

Prints single-wide characters. Single-wide characters may be used in the same line with double-wide characters.

ASCII DC3

Hexadecimal 13

Decimal 19

Exceptions

Single-wide characters may not be used in the same line with single or double-density graphics.

68 March 1999