Power Supply
Loading the Ni-Cd Battery Pack
Underside
WARNING!
1 Slide the Battery Compartment lid in the direction of the arrow and swing it open.
2 Install the Battery Pack with the arrow mark at the bottom and facing the rear of the Digital Camera.
3 Swing the Battery Compartment lid down and slide it shut.
• Charge the Battery Pack fully before operation (see page 9).
Do not dispose of in fire, put in backwards, disassemble, or short circuit; otherwise battery may leak or burst, causing possible personal injury.
Battery Pack Notes
Caution:
•Charge only with specified charger.
•The Battery can be charged within a temperature range of 32° F (0° C) and 104° F (40° C).
•The Battery Pack may be warm after charging or just after use. This is normal.
•Do not use an insufficiently charged or worn out Battery Pack.
Safety precautions:
•Do not get the Battery Pack or AA alkaline batteries near, or dispose of in fire.
•Do not directly connect (short circuit) the positive (+) and negative
•Never attempt to disassemble or reas- semble the Battery Pack.
To avoid damage to the Battery Pack:
•Do not drop or jar the Battery Pack.
•Use the Battery Pack with specified units only.
To insure longer Battery Pack life:
•While not in use, remove the Battery Pack from the Digital Camera and store in a dark, cool, dry place.
•Keep the Battery Pack terminals clean.
RBRC
RBRC
U.S.A. CONSUMERS:
ATTENTION:
The product you have purchased is powered by a nickel cadmium battery which is recyclable. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call
8
