Panasonic PV-DF203 manual Please make all cable or antenna connections before powering on, Stop

Initial Setup (Ready to Play)

Please make all cable or antenna connections before powering on.

Initial Setup (Ready to Play)

Press TV/VCR on the remote for TV-VCR mode.

1 Plug the unit power cord into an AC wall outlet.Press POWER* on the remote or unit. The unit2 comes on and auto channel and clock set starts.

CH AUTO SET PROCEEDING

•If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off.

TV/VCR

POWER

EJECT

ACTION

SELECT

SET

AUTO CLOCK SET

PROCEEDING

CANCEL : PRESS STOP KEY

Settings are made automatically. When setup3 is done, this screen appears.

2/ 6/2003 THU 12: 00PM

DST : ON

SETT I NG : CH 10

AUTO CLOCK SET

COMPLETED

If AUTO CLOCK SET IS INCOMPLETE screen appears, set the clock using MANUAL CLOCK SET procedure on next page.

AUTO CLOCK SET

I S I NCOMPLETE

PLEASE SET CLOCK BY

PRESSING ACT I ON KEY

STOP

Notes

•Function buttons are inoperative during Initial Setup.

•To remove a cassette during Auto Set, press EJECT twice on the remote or STOP twice on the unit. In this case, settings must be made manually. (See pages 16-17.)

•Depending on conditions, Auto Clock Set may take longer than 30 minutes. In this case, press STOP to stop setup and perform settings manually. (See pages 16-17.)

14 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com