Panasonic PV-DF273 Auto Operation Functions, Commercial Skip, Auto Shut Off, Power turns off

*Important: If a remote control button does not work when pressed, press the TV/VCR button on the remote and try the button again.

Auto Operation Functions

■Auto Shut Off

No broadcast signal in TV mode (Only when Weak Signal Display is set to OFF.), DVD stops, or blank tape is played for 5 minutes.

➞Power turns off

•This feature is canceled if any button is pressed during above conditions.

■Auto Playback

Insert a tape in Power off mode

➞Power turns on

• Playback begins if tape has no record tab.

■Auto Rewind (except for Recording)

Tape reaches its end

➞Rewind, ➞ Stop

■Playback Auto Eject (Repeat Play is “OFF”)

Tape with no record tab reaches its end

➞Rewind, ➞ Stop, ➞ Eject

Commercial Skip

By pressing the CM/ZERO button in Playback mode you can skip over 1 to 3 minutes of recorded tape in just a few seconds.

Press CM/ZERO repeatedly to select skip time in Playback mode.

• No indication appears.

OFF

1st Press 1 min skip

2nd Press 2 min skip

3rd Press 3 min skip

Advanced Operation

33