Panasonic PV-GS500 Attaching the lens cap, Shoulder strap fixture, Lens hood

Before using

(36)

(36)Shoulder strap fixture

This is a fixture for attaching the shoulder strap to hang the Camcorder from your neck or shoulder.

1

3

2

≥Put the strap through the fixture 1 and through the stopper 2 so it will not come off. Extend part 3 by at least 2 cm (1 inch).

≥Fit the other end of the belt similarly.

1 2

(37)

(37) Lens hood

In order to remove the lens hood, rotate it counter-clockwise 1. In order to fit it, place into slot 2, and then rotate it clockwise.

(38)

1

(38)Smart accessory shoe

The stereo zoom microphone /VW-VMH3 (optional) or the video DC light/VW-LDH3

(optional) should be mounted here.

≥When an accessory is attached to the smart accessory shoe, the power required to operate the accessory is supplied by the Camcorder. ≥When mounting or removing the accessory,

extend the viewfinder (1).

Attaching the lens cap

Fit the lens cap to protect the surface of the lens.

1Push the string through the belt. Push the lens cap through the loop in the string.

≥To fit or remove the lens cap, hold both sides of the lens cap with the tips of your finger and thumb.

≥The lens cap removed can be attached to the lens cap fixture. (It cannot be hung if the grip belt is used as a hand strap.)

14

LSQT0975