Panasonic PV-GS500 Audio dubbing, ª To cancel the standby for recording, Stop playback. Player

Edit mode

5Move the joystick up to select the [¥/;] icon again or press the [;] button on the remote control to stop recording. (Recorder)

6Stop playback. (Player)

ªTo cancel the standby for recording

When the Camcorder is standby for recording, move the joystick down and select the [∫] icon or press the [∫] button on the remote control.

≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly.

≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select

the desired sound by [SETUP] >> [AUDIO OUT] on playback.

≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected.

≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape.

≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images.

≥If a picture containing a copyright protection signal (copy guard) is recorded by the Camcorder, the picture is distorted by mosaic-

like patterns at playback.

≥Disconnect the USB cable since input signals from the external input terminal cannot be recorded while it is connected with the USB cable.

≥While pictures are input from the DV terminal, the operation icon blinks on instead of appearing from the side of the screen when you press the center of the joystick.

≥While pictures are input from the DV terminal, the TV aspect will not change even if you change the setting for [TV ASPECT] in the [SETUP] menu.

CAUTION:

Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.

Audio dubbing

You can add music or narration to the recorded cassette.

(Audio dubbing can only be performed by using the remote control.)

≥Set to Tape Playback Mode.

1When using an external microphone, securely insert the plug into the [REMOTE/ MIC] terminal.

REMOTE/MIC

2Find a scene that you want to add sound to, and press the [;] button on the remote control.

;

3Press the [AUDIO DUB] button on the remote control to make audio dubbing ready.

A.DUB ;

4Press the [;] button on the remote control to start audio dubbing.

A.DUB ¥

≥Be sure that the sound is directed towards either the external microphone or the built-in microphone.

5Press the [;] button on the remote control to stop audio dubbing.

55

LSQT0975