Panasonic PV-GS500 ª Connecting to the AC outlet, ª Attaching the battery, ª Removing the battery

Before using

ªConnecting to the AC outlet

1

1Connect the AC Cable to the AC adaptor and the AC Jack.

2Connect the DC Cable to the AC adaptor.

3Connect the DC Cable to this product.

≥The output plug of the AC Cable is not completely connected to the AC adaptor jack. As shown in 1, there is a gap.

≥Do not use the power cord for other equipment since the power cord is exclusively designed for this Camcorder. Do not use the power cord from other equipment for this Camcorder.

ªAttaching the battery

Push the battery against the battery holder and slide it until it clicks.

ªRemoving the battery

While sliding the [BATT] lever, slide the battery (or the DC Cable) to remove it.

BATT

≥Hold the battery with your hand so it does not fall.

≥Before removing the battery, be sure to set the [OFF/ON] switch to [OFF].

16

LSQT0975