Panasonic PV-GS500 ª When you stop printing halfway, Select the desired number of prints

Edit mode

3Move the joystick left and right to select a desired picture, and then press it.

4Select the desired number of prints.

≥You can set up to 9 prints.

5Select the setting for date printing.

≥If the printer is not capable of date printing, this setting is unavailable.

6Select [PAPER SIZE].

[STANDARD]: Size specific to the printer [4a5 INCH]

[5a7 INCH] [4a6 INCH] [A4]

≥You cannot set paper sizes not supported on the printer.

7Select [PAGE LAYOUT].

[STANDARD]:		Layout set on the printer
[	]:	No frame
[	]:	With frame

≥You cannot set a layout not supported on the printer.

8Set [PRINT] >> [YES] to start printing.

ªWhen you stop printing halfway

Move the joystick down.

≥Avoid the following operations during printing. These operations disable proper printing. ≥Disconnecting the USB cable ≥Removing the card

≥Switching the mode dial ≥Turning off the power

≥Check the settings for the paper size, quality of print, etc. on the printer.

≥Still pictures recorded on other equipment may not be printed.

≥When the Camcorder and the printer are connected in the Tape Recording/Playback

Mode, the [ ] Indication may appear on the LCD monitor. However, pictures cannot be printed.

≥The sides of pictures recorded when [16:9]/ [PRO-CINEMA] is set may be cut at printing. (When you purchase this unit, [ASPECT] is set to [16:9].) When using a printer with a trimming or borderless function, cancel this setting. (Refer to the operating instructions of the printer for details.)

≥If your photos are sent to a professional photo printing service, please request that they are printed in their original aspect ratio.

57

LSQT0975