Panasonic PV-GS500 Playback mode, Playing back tape, ª To adjust volume, ª Repeat playback

Playback mode

Playback mode

Playing back tape

≥Set to Tape Playback Mode.

(An operation icon automatically appears on the LCD monitor.)

PC

1Operate with joystick.

1/;: Playback/Pause

6: Rewind/Review playback (Reverts to playback with the 1/; icon.)

5: Fast forward/Cue playback (Reverts to playback with the 1/; icon.)

∫: Stop

≥The power will not turn off when the LCD monitor and the viewfinder are closed and retracted during Tape/Card playback mode.

≥During cue/review playback, fast-moving images may show noise as a mosaic.

≥Before and after cue/review playback, the screen may become blue for a moment or images may be disturbed.

ªTo adjust volume

Adjust the speaker volume for playback.

1Move the [s /VOLr] lever to adjust the volume.

VOL

Towards [r]: increases the volume

Towards [`]: decreases the volume (Nearer the bar to [r], larger the volume.)

≥On the remote control, press the [T] button to increase the volume or the [W] button to decrease it.

≥When the adjustment is completed, the volume indication will disappear.

≥If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO].

ªRepeat playback

When the tape end is reached, the tape will be rewound and played back again.

1Set [ADVANCED] >> [REPEAT PLAY] >> [ON].

≥The [ ] indication appears. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or turn off the power.)

≥When you set [USB FUNCTION] >> [WEB CAM] and then connect the USB connection cable, the repeat playback mode is canceled.

ªSettings on the audio

≥If you cannot listen to the desired audio when

playing back a tape, check the settings in [SETUP] >> [12bit AUDIO].

≥When you record and dub the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT].

47

LSQT0975