Panasonic PV-SD5000 PowerPower SupplyS pply, Charge the Battery Pack on the AC Adaptor

PowerPower SupplyS pply

Charge the Battery Pack on the AC Adaptor

1

AC Cable

AC Adaptor

Connect AC Cable (supplied) to AC IN on the AC Adaptor and plug the AC Adaptor into an AC outlet.

•POWER Lamp lights red.

•Disconnect DC Cable if it is connected to AC Adaptor.

2

POWER Lamp

3

Charge Lamp

Attach the Battery	as shown to
charge.

•Charge Lamp on the AC Adaptor flashes green. When lamp stops flashing, the Battery is fully charged. (Takes approx. 1 hour 40 minutes.)

Remove the Battery.
Slide the Battery	out and then lift up.

Battery Charging Confirmation Marker

Use this marker as a reminder to yourself when the Battery is fully charged or in need of a charge. This marker performs no function and is for your reference only.

• The Battery is no longer serviceable if the operation time is very short, even after a sufficient charge.

12
	For assistance, please call : 1-800-272-7033.

SD5000. p12-14.p65 12 80/01/04, 11:37