Panasonic PV-SD5000 operating instructions RapidFire Picture Taking

MENU Button

Capturingapt ring Imagesmages

RapidFire™ Picture Taking

With this feature, captured images are first stored in Camera memory. This speeds up the processing time and allows you to capture the next image right away.

Note

•AUDIO, SELF TIMER and TIME LAPSE functions are automatically disabled when RAPIDFIRE™ is set to ON.

Before you begin

Set the POWER Switch to REC or

MANUAL REC. (See pages 18, 19.)

POWER Switch

1 Press REC MODE repeatedly			to
select recording mode (SF, F, N).
(See page 25.)
• If the REC mode is set to ZOOM (2X,
3X),	,	or TIFF mode, change

REC mode. (See page 25.)

2 Press MENU	to display the MENU
screen. Press	or	to select	RAPID
in the MENU screen, and		press	or
to select	ON .
[ REC mode ] [ MANUAL REC mode ]

3 Press MENU	to exit.
• If you select ON, “RAPID” is displayed
on the screen.
• RapidFire™	Page Remaining is

displayed on the screen.

Basicasic OperationOperation

2 Select
Button
/ / /	1 REC	3
Note	MODE Button

• The Disk Media cannot be ejected until after the memory data has been written. Press

button to write the memory data to the Disk Media, then eject the Disk Media.

•Camera memory capacity is: 3 frames in SF mode, 4 frames in FINE mode, and 12 frames in NORMAL mode. While the Digital Camera processes the images “REC” will flash on the LCD Viewfinder, no further images can be captured while REC is flashing.

•If there are images left in Camera memory

when the power is turned off, the images are
saved to the Disk Media and then power
goes off.
• To save images in Camera memory to the Disk
Media at any time, press the	(+) button.
• Images stored in Camera memory cannot be
deleted. Save the images to the Disk Media,
then refer to page 41 (To Delete Specific
Images).

RapidFire™

Page Remain

4 Press SHTR to capture the image.

•When page remaining becomes zero, or when you change modes (e.g. REC-->MANUAL REC), images are automatically saved to the Disk

(+)Media.

Caution

•If the Battery becomes depleted with image data not saved to the Disk Media, the image data will be lost. Always confirm the Battery condition before capturing images.

27

SD5000. p25-28.p65 27 80/01/04, 11:39