Panasonic PV-SD5000 operating instructions MultiM lti Copyopy, Not turn off the Digital Camera or

MultiM lti Copyopy

You can copy specific images from one			1
Disk Media to another Disk Media using
this operation.
Before you begin
Set the POWER Switch to PLAY.
(See page 19.)	Press MENU	to display	2
the MENU screen.

POWER Switch

3

Press or to select COPY .

Press	to display COPY menu and
press	or	to select	MULTI COPY	.

Press to display the multi playback screen.

1, 2, 3, 4	5
Select Button		MENU Button
/ / /	FLASH
	Button	4SHTR

(SHUTTER)

4 Press	,	,	, or	to select the
image you want to copy, and then
press SHTR		to set the selection.

•The file number of the selected image is displayed in green.

•To cancel a selection, select the image and press SHTR again.

Important:						do
• While “PLEASE WAIT” is displayed,
not turn off the Digital Camera or							• Press MENU to exit this menu.
unplug the AC Adaptor					(supplied)
because this will cause irreversible							5 Press
damage	to the	memory,	resulting	in				(FLASH)	to copy.
reduced	image	storage	capacity.
							• “PLEASE WAIT”, then “PLEASE
Note							CHANGE DISK” is displayed. After
• If the memory capacity of the Disk Media that							Disk is changed, “PLEASE WAIT” is
you want to copy to is not sufficient, the							displayed as images are copied.
following message will appear.							When copying is complete, the
							screen	below will be	displayed.
• You can copy images from a SuperDisk
Diskette to another SuperDisk Diskette
providing the TARGET disk has enough
space. You can copy images from a Floppy							•Press MENU twice			to exit.
Disk to another Floppy Disk or to a SuperDisk
Diskette providing the TARGET disk has
enough space.
44
							For assistance, please	call : 1-800-272-7033.

SD5000. p44-46.p65 44 80/01/04, 11:41