Panasonic PV-SD5000 Connection, Personal Computer, To PC Terminal Power Switch

Transferring Your Imagesmages (Windows)indows)

By using the included USB cable to connect to a PC, you can use your SuperDisk camera as an external storage device.

2

TO PC Terminal

POWER Switch

* Data transfer using USB cable is applicable

only for Microsoft		® Windows	® 98
preinstalled PC with USB port, Windows
2000 PC, iMac		®, iBook ®, Power Macintosh
G3	with USB port or Power Mac™ G4 and
Mac	OS version 8.1	or later.

•The USB Driver software for Windows 2000 is currently not available, but will be available in the future on our website at www.panasonic.com/palmcam or by

calling 1-800- 272-7033.

Personal Computer

®

®

3

1

USB Cable (supplied)

USB Terminal

Connection

1 Turn on your PC.

2 Set the POWER Switch to PC on the Digital Camera.

•The POWER LED lamp lights up.

•LCD Viewfinder is off in PC mode.

3 Connect the Digital Camera to your PC (Windows) using the USB Cable (supplied).

• You can use this Digital Camera as a SuperDisk Drive. (See pages 62, 63, 64, 66.)

Note

•For extended periods of use, it is recommended to use the AC Adaptor (supplied) as a power source.

•Once the USB driver is installed, the Digital Camera can be connected even after the PC has been started. The USB Cable (supplied) must be connected as described in

the above steps.

SpecialSpecial FeaturesFeatres

49

SD5000. p47-51.p65 49 80/01/04, 11:41