TransferringransferringYouro r Imagesmages (Macintosh)Macintos

By using the included USB cable to connect to a PC, you can use your SuperDisk camera as an external storage device.

2

TO PC Terminal

* Data transfer using USB cable is applicable

only for Microsoft

® Windows

® 98

preinstalled PC with USB port, Windows

 

2000 PC, iMac

®, iBook ®, Power Macintosh

G3

with USB port or Power Mac™ G4 and

 

Mac

OS version 8.1

or later.

 

The USB Driver software for Windows 2000 is currently not available, but will be available in the future on our website at www.panasonic.com/palmcam or by

calling 1-800- 272-7033.

®

®

POWER Switch

3

USB Terminal

USB Cable (supplied)

1

Connection

1 Turn on your PC.

2 Set POWER Switch to PC on the Digital Camera.

The POWER LED lamp lights up.

LCD Viewfinder is off in PC mode.

3 Connect the Digital Camera to your PCusing the USB Cable (supplied).

• You can use this Digital Camera as a SuperDisk Drive. (See pages 62, 65, 66.)

Note

For extended periods of use, it is recommended to use the AC Adaptor (supplied) as a power source.

Once the USB driver is installed, the Digital Camera can be connected even after the PC has been started. The USB Cable (supplied) must be connected as described in

the above steps.

56

 

For assistance, please call : 1-800-272-7033.

SD5000. p52-57.p65

56

80/01/04, 11:42

Page 56
Image 56
Panasonic PV-SD5000 operating instructions Power Switch USB Terminal USB Cable supplied