Panasonic PV C2033W, PV C2023 TV Timer Features, ON-TIMER with Alarm, TIMER/FM On Timer

TV Timer Features

ON-TIMER with Alarm

This unit can be set to automatically power on in one of 3 modes (TV, Playback, or FM radio).

You can also combine the On-Timer with a one minute alarm that gradually increases in volume.

Ready Check List

The clock is set to the correct time.

1 Press PROG to display SET PROGRAM screen.

2				SET	PROGRAM		1)	Press	to select “ON
		T I MER PROGRAMMING						TIMER.”
							2)	Press	to display ON
		ON TIMER
								TIMER screen.
	SELECT :					SET :
	END			: PROG
3				ON		T IMER	1)	Press	to select
								desired settings.
			6:--AM CH --
							2)	Press	to set the
	ALARM			: ON
								ON-TIMER TIME or
								ON-TIMER mode.
	SELECT :					SET :
	END			: PROG

•Make sure a tape is inserted if Playback mode is selected.

•See “FM Radio” on pages 20 and 21 for instructions on how to preset FM stations.

CH02	CH03	CH125	• ON-TIMER mode
CH01		PLAY
			selection order
FM9	FM8	FM1

4	ON T IMER		Press	to select
			ALARM “ON” or “OFF.”
	6:00AM	CH08
	ALARM : ON

CANCEL : ADD / DLT

SELECT : SET :

END : PROG

When “ON” is selected, an alarm will gradually increase in volume for one minute or until canceled by pressing any button (including VOL + -).

To Make Corrections, use and to move back and correct.

TIMER/FM

CH	ON TIMER
	indicator

Press PROG to set ON TIMER.

5 • “ON TIMER SET” is displayed.

• ON TIMER Indicator lights on the unit.

To Cancel ON-TIMER,

Repeat steps 1 and 2. Then, press ADD/DLT to clear the time in step 3. Now, press PROG to end.

“ON TIMER END” briefly appears on-screen.

Note

•If no button on the remote or unit (including a button used to turn off the alarm) is pressed within 60 minutes after unit turns itself on, it will turn itself back off.

16 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com