Panasonic PV C2023 Cancel a Timer Recording Recording is in progress, To Replace program

Cancel a Timer Recording: (Recording is in progress)

Hold down STOP for a few seconds to cancel the Timer Recording.

•Any future daily or weekly recordings will be performed as programmed.

Review, Replace or Clear Program Contents : (Recording is not in progress)

1 Repeat steps 1 and 2 on page 22.

2	P DT START					STOP		CH SPD		Press	to select the
		2	8	10	: 00a	12	: 00p125		SP	desired program.
		1 day		9	: 00p12 : 00a			08	SP
	3		10	8	: 00p	9	: 00p	10	SP
	4		SU	9	: 00p	10	: 00p	L LP
			CANCEL : ADD / DLT
			SELECT :				SET :
			END		: PROG

SELECT/SET :CH UP :CH DOWN :VOL UP

:VOL DOWN

PROG

ADD/DLT

STOP

3 To Replace program...

DATE		START	STOP	CH	1)	Press to display.
	8 SAT	9:00P 12:00A		08	2)	Press	to select
TODAY				SP		and press	or
----------------------------------------------						to set new program
	SELECT :		SET :			contents.
	END	: PROG			3)	Press PROG.
To Clear program...
	P DT START		STOP CH SPD		Press ADD/DLT.

1-- -- : -- -- : -- -- --

28 10 : 00p12 : 00a125 SP

3	10	8	: 00p 9	: 00p	10	SP
4	SU	9	: 00p10	: 00p	L	LP

CANCEL : ADD / DLT

SELECT : SET :

END : PROG

4 Press PROG twice to exit this mode.

Notes

•2 minutes before Timer recording is performed, “PLEASE PREPARE FOR TIMER REC” appears and/or the PROG TIMER Indicator flashes. Be sure a cassette with record tab is loaded and the unit is in Stop mode.

•If the start times of two programs overlap, the lower numbered program will have priority.

•If the start time for a Timer Recording comes up during a normal recording or One Touch Recording (page 12), the Timer Recording will not be performed.

•If there is a power interruption of more than one minute, the recording may not be performed or continued.

•If “INCOMPLETE” appears after all items have been set, check all entries and make necessary corrections.

Timer Operation

23